1911 PX™-09 Standard Size - Pistol Grips (Golf Ball Dimple Pattern, Semi-Gloss Black)

SKU
B4
1911 Grip Slimline Screw Bushings with CHROME COATING

1911 Grip Slimline Screw Bushings with CHROME COATING

1911 Torx Grip Slimline Screws with BLACK ZINC COATING

1911 Torx Grip Slimline Screws with BLACK ZINC COATING

Availability: In stock
$15.95

Polymer Extreme 1911 Pistol Grips
Golf Ball Dimple Pattern, Semi-Gloss
Model: PX-09

Screw and Screw Bushing Compatibility

The dimple pattern gives you consistent and an even grip every time. These grips are truly a joy to hold. The POLYMER EXTREME (PX) series 1911 pistol grips are constructed of heat resistant, high impact, and high bending strength polymers. These grips are inspired by Ray Gorzyn who is an accomplished 1911 gunsmith with over 30+ years of experience and an active IPSC shooter. Hundreds of 1911 have been custom built and produced by Ray and are considered top of the line..


All our 1911 grips are conveniently pre-cut for ambi safeties.

Specifications (Based on the JIS K6911 standard)

- Thickness: 0.295" (0.749cm)
- Density: 1.42
- Water Absorption: 0.3%
- Molded Shrinkage: 0.7%-1.25%
- Heat Resistance:(2hr/'C): 200'C
- Impact Strength: 3.0-3.5 Kgf-cm/cm2
- Flexible Strength: 9.5 Kgf/mm2
- Tensile Strength: 5.6 Kgf/mm2
- Compressive Strength: 22.0 Kgf/mm2
- Isolation Resistance: 1x5^(8-9)Ω (ohm)
- Breakdown Voltage: 11.0Kv/mm

NOTE:Cannot fit on SLIMLINE SCREWS/STANDARD BUSHINGS combination
NOTE: SI PX™ Grips Fit 1911 Full Size (Government Size) Model

Write Your Own Review
You're reviewing:1911 PX™-09 Standard Size - Pistol Grips (Golf Ball Dimple Pattern, Semi-Gloss Black)